In MakerSync, we rigorously test physical hardware adapters before rolling them out. Here is a summary of the current best practices and working profiles for the Creality K1 / K1 Max and Snapmaker U1 / Artisan series:
1. Creality K1 / K1C / K1 Max (Rooted Klipper)
- Firmware: Stock CrealityOS vs Rooted Klipper (Guppy Screen / Fluidd).
- Recommended OrcaSlicer Profile:
- Acceleration: 12,000 mm/s² (outer walls 5,000 mm/s² for ringing reduction).
- Volumetric Speed: Max 20 mm³/s for standard Hyper PLA; 15 mm³/s for PETG.
- Z-Offset: Always calibrate auto-bed level with bed preheated to 60°C for at least 5 minutes.
2. Snapmaker U1 & Artisan
- Safe-Mode: When using custom Wi-Fi print workflows, verify G-code temperature tags before firing.
- Enclosure management: Keep door cracked open when printing PLA to prevent heat creep in the high-flow hotend.
Share your profile tweaks and questions below!